Dynamo

471Q-3701950

When the engine is running normally, power is supplied to all electrical equipment except the starter, and the battery is charged at the same time. The generator is the main power source of the car.

Pregunte ahora

Starter

473QA-3708020

The function of the car starter is that the starter can convert the electric energy of the battery into mechanical energy, and drive the engine flywheel to rotate to realize the starting of the engine.

Pregunte ahora

Oxygen Sensor F3

476Q-1D-1207804

Oxygen sensor is a key feedback sensor in the EFI engine control system. It is a key part to control automobile exhaust emissions, reduce automobile pollution to the environment, and improve the fuel combustion quality of automobile engines. Oxygen sensors are installed on the engine exhaust pipe.

Pregunte ahora

Water tank

F3-1301100

F3,G3,L3,F3R,G3R,brand newF3

Pregunte ahora

Upper water pipe F3

F3D-1303011

The upper water pipe, connected to the cylinder head water outlet or the thermostat cover, transmits the coolant, and is used in the automobile cooling system

Pregunte ahora

Downpipe F3

F3D-1303012

Downpipe, connected to the water inlet of the water pump, conveying coolant

Pregunte ahora

Water tank electronic fan

F3-1308010

It is generally used for engine heat dissipation and antifreeze heat dissipation to ensure that the engine will not fail due to high temperature.

Pregunte ahora

Kettle F3

F3-1311100-C1

An integral part of the engine cooling system that acts as a balancing tank pressure

Pregunte ahora

Platen

F3-1601100

F3, F3R, G3, L3, G3R, Su Rui, the new F3, Yuan, the third generation F3, Qin Pro fuel, the new Qin fuel

Pregunte ahora

Clutch plate

F3-1601200

F3, F3R, G3

Pregunte ahora

Release bearing

BS15-1602800

The automobile release bearing is used to add and subtract the clutch, and the release bearing rests on the clutch pressure plate, so that the separation of the clutch pressure plate plays the role of adding and subtracting gears.

Pregunte ahora

Split fork

5T14-1602811

The lever, the release fork presses the release bearing, so that the release bearing presses the release lever again, so that the pressure plate and the grinding plate are separated.

Pregunte ahora

Clutch master cylinder

F3-1608100

The clutch master cylinder is the part connected to the clutch pedal and connected to the clutch booster through the oil pipe. Its function is to collect the pedal stroke information to separate the clutch through the action of the booster.

Pregunte ahora

Clutch slave cylinder

BS15-1602801

F3,G3,F3R

Pregunte ahora

Reverse switch

BS15-3729800

The car reversing switch is to turn on the reversing lights and the reversing radar

Pregunte ahora

Two-axis

BS15-1701004

power output shaft

Pregunte ahora

Synchronizer 1/2

BS15-1701906A

F3, F3R, G3

Pregunte ahora

One axis

BS15-1701003

The input shaft of the gearbox is to transmit the power generated by the engine to the gearbox, so that the gearbox can increase and decrease gears, and the output shaft is to realize the acceleration and deceleration and transmit the power to the driving wheel.

Pregunte ahora

Odometer sensor F3

5T14-3802080

The more commonly used electronic instrument is generally on the output shaft of the gearbox. Or a speed sensor is installed on the wheel, and the read speed is converted into vehicle speed and history through the calculation formula embedded in the control module.

Pregunte ahora

Gear line

F3D-1703200

The main functions of the car gear line are: returning to neutral and adding and subtracting gears

Pregunte ahora